Lubricator FlexxPump1 Power Supply

Automatic lubricator

for the direct supply of one lubrication point

The FlexxPump4 N is a highly efficient, microprocessor-controlled lubricator. The power supply for the FlexxPump1 N is 24 VDC using an M12x1 connector. The lubricator is suitable for the accurate and demand-oriented direct supply of one lubrication point with grease or oil. Due to the high operating pressure of up to 70 bar (1015 psi), the FlexxPump4 N can also be used in combination with progressive lubricant distributors to supply several lubrication points.

The following operating modes can be flexibly set on the FlexxPump1 N:

  • Hour-Mode -h- (setting of a pause time between two lubrication cycles and setting of the number of cycles during a dispensing cycle)
  • Empty-Time-Mode Et (setting of an emptying time in months)
  • Pulse-Mode PUL (control of the FlexxPump4 N via TriboServ FlexxControl or PLC)
Lubricants:
  • Greases up to NLGI class 2
  • Oils up to 30,000 mm²/s

Go to lubricants ►

 

Applications:
  • Rolling and plain bearing lubrication
  • Linear guides
  • Ball screws
  • Racks and pinions
  • Chains
Features
Hour-Mode -h-:

Pause time 1 - 99 h

Number of cycles 1 - 10

Empty-Time-Mode Et:

Emptying time 1 – 24 months

External connection:
included
Pressure monitoring:
included
Empty level warning:
included
Technical specifications
Power supply:
+24 VDC
Connection plug:
M12x1 4 pole, A-coding
Number of outlets:
1
Operating temperature:

min. – 20 °C

max. + 70 °C

Maximum output pressure:
30 bar (435 psi)
Protection class:
IP54
Volume per dispensing stroke:
0,15 cm³
Cartridge volume:

125 ml (Standard Cartridge)

250 ml (optional)

Outlet connection:
External thread M16x1,5, Internal thread M10x1
Mounting position:
upright
Weight:
approx. 365 g
Dimensions W, H, D:

83 x 149 x 85 mm (125ml cartridge)

 

83 x 185 x 85 mm (250ml cartridge)

Article no. Name Cartridge size
210998 FP1 N125 125 ml
210999 FP1 N250 250 ml