Lubricator FlexxPump1 Battery

Automatic lubricator

for direct supply of one lubrication point

The FlexxPump1 B is a highly efficient, microprocessor-controlled single-point lubricator. The power supply for the FlexxPump1 B is provided by a 4,5 V battery pack. The lubricator is suitable for the accurate and demand-oriented direct supply of grease or oil of one lubrication point. Due to the high operating pressure of up to 30 bar (435 psi), the FlexxPump1 B can also be used in combination with progressive lubricant distributors to supply several lubrication points.

The following operating modes can be flexibly set on the FlexxPump1 B:

Hour-Mode -h- (setting of a pause time between two lubrication cycles and setting of the number of cycles during a dispensing cycle)
Empty-Time-Mode Et (setting of an emptying time in months)

The lubricator can optionally be equipped with an M12x1 connector as a connection for an LED cable. This enables remote monitoring of the lubricator in addition to the display.

Lubricants:

Greases up to NLGI class 2
Oils up to 30,000 mm²/s

Go to lubricants ►

Applications:

Rolling and plain bearing lubrication
Linear guides
Ball screws
Racks and pinions
Chains

Downloads

technisches-datenblatt-flexxpump1-b125-m12.pdf ( 746.1 KiB)

technisches-datenblatt-flexxpump1-b125.pdf ( 718.2 KiB)

ba-fp1-b-de-r0-220131.pdf ( 5.1 MiB)

ba-fp1-b-en-r0-220131.pdf ( 5.2 MiB)

Features

Hour-Mode -h-:

Pause time 1 - 99 h

Number of cycles 1 - 10

Empty-Time-Mode Et:

Emptying time 1 – 24 months

External connection:

depending on version

Pressure monitoring:

included

Empty level warning:

included

Technical specifications

Power supply:

4,5 V

Number of outlets:

Operating temperature:

min. – 15 °C (Lithium)

min. +15 °C (Alkaline)

max. + 70 °C

Maximum output pressure:

30 bar (435 psi)

Protection class:

IP54

Volume per dispensing stroke:

0,15 cm³

Cartridge volume:

125 ml

Outlet connection:

External thread M16x1,5, Internal thread M10x1

Mounting position:

upright

Weight:

approx. 365 g

Dimensions W, H, D:

83 x 149 x 85 mm

Article no.	Name	Connection for LED cable
211001	FP1 B125	✘
211002	FP1 B125-M12	✔

Are you interested or do you have further questions about the FlexxPump?

Here you will find your competent contact person!

Lubricator FlexxPump1 Battery

Automatic lubricator

for direct supply of one lubrication point

Are you interested or do you have further questions about the FlexxPump?

Unverbindlich Informationen und Preise anfordern